Emery Surfboards
A modern performance shortboard with a hip in it’s outline at the tail along with mid to low rails give it control and speed through your change of direction. Haz loves his with a swallow tail, add this with it’s big deep single to double concave under your feet and it gives you the speed and power to fly! Haz loves it ☺
Features
- Rolled deck to fit more foam for floatation in the middle
- Straighter outline because of the hip to give it speed
- Big deep concaves to hold in and give maximum drive and push
- Swallow tail with quad set up can work amazing for release out of the top
| Haz Short - Recommended Dimensions | |||
|---|---|---|---|
| Length | Width | Thickness | Ltrs |
| 5'5 | 17 7/8 | 1 7/8 | 19.9L |
| 5'8 | 18 1/4 | 2 1/16 | 23.3L |
| 5'9 | 18 1/2 | 2 1/18 | 24.4 |
| 5'10 | 18 3/4 | 2 1/4 | 26.46L |
| 5'11 | 19 | 2 3/8 | 29L |
| 6'0 | 19 1/4 | 2 1/2 | 31.3L |
| 6'1 | 19 1/2 | 2 1/2 | 32.1L |
| 6'2 | 19 3/4 | 2 5/8 | 34.2L |
| 6'3 | 20 | 2 5/8 | 35.2L |
Couldn't load pickup availability
Create your own board to best suit your ability and get the ultimate performance from the surfboard for you.
Start by entering the recommended dimensions for the particular model you have chosen & then adjust to suit your requirements.
Please allow up to 4 weeks for your new PU board or approx 6 weeks for your EPS board to be built and then shipped to your door.
All our surfboards are expertly wrapped for safe and secure delivery to your door. They are double layered bubble wrap, top and bottom with extra roll of bubble at nose and tail with higher density foam wrapped rails. Cardboard boxed and you will receive online tracking of our board from the moment it leaves Emery HQ and arrives to your door.
SURFBOARD SHIPPING RATES
INTERNATIONAL
Please email sales@emerysurfboards.com for any international surfboard shipping enquiries and we can let you know if it's possible and if so provide a quote to your door.
Uses a standard Expanded Polystyrene (EPS) with a plywood stringer blank after shaped it is glassed using epoxy resin with two layers of four ounce fibre glass on the deck and one layer of four ounce fibre glass on the bottom.
Usually added with patches of four ounce fibre glass to wrap around the tail to prevent the rail/tail from crushing or denting severely. Using an EPS blank it’s typically the lightest surfboard construction for fast performance surfing!
The added foam gives you more paddling speed and increased manoeuvrability allowing you to ride a smaller board. EPS foam core is also known for it’s great durability. Together these make your board marginally lighter then the standard PU surfboard. EPS Construction is the way to go for your small wave performance surfboards.
STANDARD PU STRINGER
This is your most common standard stock surfboard. Using a Polyurethane (PU) South Coast Foam blank with a plywood stringer after shaped it is glassed using a polyester resin with two layers of four ounce fibre glass on the deck and one layer of four ounce fibre glass on the bottom.
Patches of four ounce fibre glass are wrapped around the tail to prevent the rail/tail from crushing or denting severely. You will find most of our surfboards are built using this technology. This technology is great for everyday use and has performance in all types of conditions and wave sizes and levels of surfer.
