Skip to product information
1 of 1

Emery Surfboards

Retro Bay Twin Mid - Custom Order

Regular price $1,200.00 AUD
Regular price Sale price $1,200.00 AUD

The Retro Bay Twin Mid is designed with speed, flow & fun in mind.

The mellow rocker with added foam in the middle and low rails all work together to create a super fun board for long green walls. The ultimate combo of being a twin fin set up, channels up back and a pin tail allows you to pivot and turn with ease. 

Features

- Rocker – Med to Low
- Bottom – V through front & middle with slight double concave out the back
- Pin tail with channels
- Goes best with Future Fins


Retro Bay Twin Mid - Recommended Dimensions
Length Width Thickness Ltrs
6'4 20 1/2 2 5/8 37L
6'8 20 5/8 2 5/8
39.5L
7'2 21 3 49L
7'6 21 1/4 3 54.5L
8'0 21 1/2 3 60.1L
Choose Your Dimensions

If you are unsure about your custom dimensions you can request a call with Al to discuss your order before he starts shaping.

Custom Order Guide

Create your own board to best suit your ability and get the ultimate performance from the surfboard for you.

Start by entering the recommended dimensions for the particular model you have chosen & then adjust to suit your requirements. 

Please allow up to 4 weeks for your new PU board or approx 6 weeks for your EPS board to be built and then shipped to your door.

Board Packing & Shipping

All our surfboards are expertly wrapped for safe and secure delivery to your door. They are double layered bubble wrap, top and bottom with extra roll of bubble at nose and tail with higher density foam wrapped rails. Cardboard boxed and you will receive online tracking of our board from the moment it leaves Emery HQ and arrives to your door. 

SURFBOARD SHIPPING RATES

AUSTRALIA
Australia wide flat rate $45 exc WA/TAS/NT $90

INTERNATIONAL
Please email sales@emerysurfboards.com for any international surfboard shipping enquiries and we can let you know if it's possible and if so provide a quote to your door. 

Surfboard Packing at Emery

Technology

STANDARD EPS SURFBOARD

Uses a standard Expanded Polystyrene (EPS) with a plywood stringer blank after shaped it is glassed using epoxy resin with two layers of four ounce fibre glass on the deck and one layer of four ounce fibre glass on the bottom.

Usually added with patches of four ounce fibre glass to wrap around the tail to prevent the rail/tail from crushing or denting severely. Using an EPS blank it’s typically the lightest surfboard construction for fast performance surfing!

The added foam gives you more paddling speed and increased manoeuvrability allowing you to ride a smaller board. EPS foam core is also known for it’s great durability. Together these make your board marginally lighter then the standard PU surfboard. EPS Construction is the way to go for your small wave performance surfboards.

STANDARD PU STRINGER

This is your most common standard stock surfboard. Using a Polyurethane (PU) South Coast Foam blank with a plywood stringer after shaped it is glassed using a polyester resin with two layers of four ounce fibre glass on the deck and one layer of four ounce fibre glass on the bottom.

Patches of four ounce fibre glass are wrapped around the tail to prevent the rail/tail from crushing or denting severely. You will find most of our surfboards are built using this technology. This technology is great for everyday use and has performance in all types of conditions and wave sizes and levels of surfer.

View full details