The Dime - Custom Order

820.00 AUD

Turn on a dime.

Coming from the drive of the competition to surf at full performance in all types of conditions. We used the best parts of our performance shortboard's with some of the key outline curves from our small wave boards to make The Dime as our new all rounder.

Push it hard and it holds in, extra tail lift to flip from rail to rail with ease. A wider outline and a bit more foam in the nose make it a fav of ours.

The Dime is suitable for all levels of surfer as an all rounder for all conditions.

The Dime - Recommended Dimensions
Length Width Thickness Ltrs
5'6 18 1/4 2 21.5L
5'7 18 3/8 2 1/16 22.7L
5'8 18 1/2 2 1/8 23.5L
5'9 18 5/8 2 3/16 25.4L
5'10 18 3/4 2 1/14 26.1L
5/11 18 7/8 2 5/16 27.5L
6'0 19 2 3/8 28.5L
6'1 19 1/8 2 7/16 30.2L
6'2 19 1/4 2 1/2 31.5L
6'3 19 3/8 2 9/16 33.0L
6'4 19 1/2 2 5/8 34.4L
6'5 19 5/8 2 11/16 35.9L
6'6 19 3/4 2 3/4 37.4L

Choose Your Dimensions

If you are unsure about your custom dimensions you can request a call with Al to discuss your order before he starts shaping.

820.00 AUD

or make 4 interest-free payments with Afterpay More info

Create your own board to best suit your ability and get the ultimate performance from the surfboard for you.

Start by entering the recommended dimensions for the particular model you have chosen & then adjust to suit your requirements. 

Please allow up to 4 weeks for your new board to be built and shipped to your door.

STANDARD EPS SURFBOARD

Uses a standard Expanded Polystyrene (EPS) with a plywood stringer blank after shaped it is glassed using epoxy resin with two layers of four ounce fibre glass on the deck and one layer of four ounce fibre glass on the bottom.

Usually added with patches of four ounce fibre glass to wrap around the tail to prevent the rail/tail from crushing or denting severely. Using an EPS blank it’s typically the lightest surfboard construction for fast performance surfing!

The added foam gives you more paddling speed and increased manoeuvrability allowing you to ride a smaller board. EPS foam core is also known for it’s great durability. Together these make your board marginally lighter then the standard PU surfboard. EPS Construction is the way to go for your small wave performance surfboards.

STANDARD PU STRINGER

This is your most common standard stock surfboard. Using a Polyurethane (PU) South Coast Foam blank with a plywood stringer after shaped it is glassed using a polyester resin with two layers of four ounce fibre glass on the deck and one layer of four ounce fibre glass on the bottom.

Patches of four ounce fibre glass are wrapped around the tail to prevent the rail/tail from crushing or denting severely. You will find most of our surfboards are built using this technology. This technology is great for everyday use and has performance in all types of conditions and wave sizes and levels of surfer.

All our surfboards are expertly wrapped for safe and secure delivery to your door. They are double layered bubble wrap, top and bottom with extra roll of bubble at nose and tail with higher density foam wrapped rails. Cardboard boxed and you will receive online tracking of our board from the moment it leaves Emery HQ and arrives to your door. 

SURFBOARD SHIPPING RATES

AUSTRALIA
Australia wide flat rate $45 exc WA/TAS/NT $85

INTERNATIONAL
Please email sales@emerysurfboards for any international surfboard shipping enquiries and we can let you know if it's possible and if so provide a quote to your door. 

Surfboard Packing at Emery